ASE GRC 200 FC is a machine designed for pumping alkali-resistant fibreglass reinforced concrete mortars. It has technical properties to respond to every need for precast spraying applications.

It is mounted on a robust body. Thanks to its strong wheels, it can be easily moved in the operation site. With the boom connected to this body, mortar hoses and fibreglass can be easily moved during spraying, which facilitates the use of the spraying gun.

Since the pump system used in the machines is a progressive screw pump, the mortar can be conveyed in a more homogenous state and without any aggregation. This property of it makes the machine superior than those operated by a peristaltic pump system.

Thanks to its frequency converter, the pumping capacity can be adjusted in any rate any time according to the material requirement and the type of the application.

The sieve with vibrator enables the material to be applied in the specified standards.

On the control panel, all the necessary functions are designed for easier use. With a pneumatic control, the spraying gun can turn the pump on and off. Precise air controls can be set separately for each function and each has a separate manometer.

Its high capacity pump vessel is specially designed in an angle required for convenient material flow. The feed screw and the feed bunker provide efficient and economic operational conditions. Thereby, the machine can be easily cleaned at the end of the application.

Videos

Photos

Technical Details

Conveying capacity:*

0-16 l/min

With various pump:*

0-55 l/min

Conveying pressure:*

30 bar

Air requirement:

1800 l/min, 8 bar

Power supply:

380 V, 50 Hz

Pumping motor:

5,50 kW

Power cable:

5x4 mm2

Fuse protection:

3x25 A

Remote control:

Pneumatic

Conveying hose:

Ø 25 mm

Hopper content:

80 l

Filling height:

835 mm

Dimensions (L/W/H):

1550/955/2760 mm

Total weight:

225 kg

* Depending on motor speed, mortar quality, composition and consistency, pump type and condition, diameter of the conveying hose.

Fields of Applications

For all pumpable glass fibre reinforced concrete mortars, such as:

Precast concrete

With the concentric fibre gun, mixing the mortar-concrete in the gun and spraying

Pumping the premixed fibre mixed with concrete

With twin head guns, high-flow spraying

Low-flow decorative mould casting

... and many more.

Standart Equipments

Pumping unit D 4-2

Geared motor 5,50 kW

Control unit with frequency convertor

Special concentric spray gun

Sieve with vibrator

Mortar hose 10 m

Air hoses 8 mm 11 m

Glass fibre tray

Extension boom

Power cable 5x4 mm2 15 m